Papers presented during the conferencewere published in Advances in Science and Technology Research Journal (ASTRJ) and indexed in various databases.
List of participants and presented papers:
| Anna Rudawska, Izabela Miturska, Dana Stančeková, Jacek Mucha |
The strength of traditional and self-pierced riveted joints |
| Petr Hrabě, Viktor Kolář, Abraham Kabutey, Aleš Sedláček |
Welding materials used to increase service life of agricultural machinery processing soil |
| Vasile Ceclan, Sorin Grozav | Determination of the force required for the hydroforming of al 99,5 |
| Robert Karpinski, Jakub Szabelski, Jacek Maksymiuk |
Analysis of the properties of bone cement with respect to its manufacturing and typical service lifetime conditions |
| Milan Vaško, Marián Handrik, Peter Kopas, Bohuš Leitner |
Optimization and design of the vulcanization press sandwich pressure plate parameters |
| Vladimíra Schindlerová, Ivana Šajdlerová | The importance of proper evidence and identification of metallurgical materials for effective management of the company |
| Augustín Görög, Ingrid Görögová, Dana Stančeková, Miroslav Janota |
Influence of roller – burnishing on surface roughness parameters and roundness |
| Jiří Hajnyš , Marek Pagáč, Tomáš Zlámal, Jana Petrů, Lukáš Kousal |
Stiffness of 316L stainless steel support structures proposed for the SLM process |
| Peter Kopas, Milan Sága, Michal Jambor, František Nový, Libor Trško, Lenka Jakubovičová |
Comparison of the mechanical properties and microstructural evolution in the HAZ of HSLA DOMEX 700MC welded by gas metal arc welding and electron beam welding |
| Vladimíra Schindlerová, Ivana Šajdlerová, Dominika Lehocká | Dynamic Simulation for Optimisation Solution of Manufacturing Processes |
| Lenka Jakubovičová, Alžbeta Sapietová, Jan Moravec |
Static analysis of transmission tower beam structure |
| Sylvia Kuśmierczak, Martin Makovský | Problems of blackening of steel parts in technical practice |
| Jaromir Moravec, Iva Novakova, Tomasz Kik |
Possibilities of using interlayers during diffusion welding of Ti Gr2 and AISI 316L |
| Alžbeta Sapietová, Filip Chovanculiak, Vladimír Dekyš, Lukáš Gajdoš |
The contribution to the modal analysis of the control system |
| Ivan Kuric, Vladimír Tlach, Zuzana Ságová, Miroslav Císar, Igor Gritsuk |
Measurement of Industrial Robot Pose Repeatability |
| Marián Handrik, Jana Handriková, Milan Vaško, Filip Dorčiak |
Comparation of nonuniform and uniform Monte – Carlo Searching |
| Jaromir Moravec, Iva Novakova, Jiri Sobotka, Tomasz Kik |
Application possibilities of the low-temperature repairs on creep-resistance turbine components from material GX23CrMoV12-1 |
| Jan Novotný, Irena Lysoňková, Milan Sapieta |
Nanocomposite coatings in polymeric matrices and their effect on friction coefficient |
| Jakub Szabelski | Effect of Incorrect Mix Ratio on Mechanical Properties of Two Component Adhesive Materials |
| Matej Kandera, Miroslav Císar, Ivan Zajačko |
Capabilities of processing and visualization of production facilities diagnostic data |
| Tetiana Vitenko, Paweł Droździel, Nazar Horodyskyi |
Hydrodynamics features in cavition devices under tangent medium input |
| Tomáš Zlámal, Jana Petrů, Šárka Malotová, Zbigniew Brytan, Václav Musil |
The Evaluation of the Surface Quality after Laser Cutting |
| František Bárnik, Milan Sága, Ondrej Štalmach |
Innovation of hardness tester mechanism and its functionality test |
| Peter Šulka, Milan Sapieta | Static structural analysis of rolling ball bearing |
| Mário Drbúl, Pavol Martikáň, Jozef Bronček, Ivan Litvaj, Jaroslava Slobodová |
Analysis of roughness profile on curved surfaces |
| Vladimír Bulej, Nadežda Čuboňová, Manfred Eberth, Karol Vasilko |
The mould for production of plastic spout cap with internal thread by injection moulding |
| Ondrej Stalmach, Vladimir Dekys, Frantisek Barnik, Jan Simon |
The contribution to the determination of the thermal emissivity of the composite material using the long-wave infrared camera |
| Ivan Zajačko, Tomáš Gál, Zuzana Ságová, Vasyl Mateichyk, Dariusz Wiecek |
Artificial Intelligence methods in technical diagnostics |
| Maciej Kowalski, Magdalena Wiśniewska, Paweł Karolczak, Jozef Holubjak |
Possibilities of applying motif group parameters for description roughness of turned surfaces |
| Miroslav Müller, Petr Valášek, Miloslav Linda, Viktor Kolář |
Research on water jet cutting of composites based on epoxy / microparticles from coconut shell |
| Mária Čilliková, Miroslav Neslušan, Anna Mičietová, Juraj Uríček |
Non homogeneity of surface integrity after hard milling of high tempered bearing steel |
| Nataša Náprstková, Pavel Kraus, Jan Sviantek, Tuong Nguyen Van |
Influence of Ca, Sb and Heat Treatment on AlSi9CuMnNi Alloy in Frame of their properties from View of Machining |
| Tomáš Dodok, Nadežda Čuboňová, Dorota Wiecek |
Optimization of machining processes preparation with usage of Strategy Manager |
| Jiří Kratochvíl, Marek Sadílek, Jozef Mrazik |
The effect of chip former on power loading of recessing tool |
| Anna Rudawska, Izabela Miturska | Impact Study of Single Stage and Multi Stage Abrasive Machining on Static Strength of Lap Adhesive Joints of Mild Steel |
| Libor Sitek, Petr Hlaváček, Lenka Bodnárová |
Use of high-speed water flows for accelerated mechanical modelling of erosive wear of concrete surfaces |
| Karel Šramhauser, Nataša Náprstková, Pavel Kraus, Martin Marek |
Tool life rating of the cutting insert |
| Tomáš Zlámal, Jana Petrů, Šárka Malotová, Zbigniew Brytan, Václav Musil |
The Evaluation of the Surface Quality after Laser Cutting |
| Adam Patalas, Michał Regus, Katarzyna Peta |
Studies of thin-walled parts deformation by gripping force during turning process on an example of bearing ring |
| Donatas Kriaučiūnas, Saugirdas Pukalskas, Alfredas Rimkus |
Simuliation of spark ignition engine performance working on biogas hydrogen mixture |
| Iwona Rybicka, Ondrej Stopka, Vladimír Ľupták, Mária Chovancová, Paweł Droździel |
Application of the methodology related to the emission standard to specific railway line in comparison with parallel road transport: a case study |
| Ivan Kuric, Vasyl Mateichyk, Miroslaw Smieszek, Mykola Tsiuman, Nataliia Goridko, Igor Gritsuk |
The peculiarities of monitoring road vehicle performance and environmental impact |
| Pavol Kukuča, Dalibor Barta, Robert Labuda, Tsvetomir Gechev |
Engine with unconventional crank mechanism FIK |
| Jacek Caban, Jan Vrabel, Branislav Šarkan, Janusz Zarajczyk, Andrzej Marczuk |
Analysis of the market of electric tractors in agricultural production |
| Pavol Kukuča, Dalibor Barta, Ján Dižo, Jacek Caban |
Piston kinematics of a combustion engine with unconventional crank mechanism |
| Katarzyna Peta, Jan Żurek, Adam Patalas |
Non-destructive testing of automotive heat exchangers |
 |
SLOVAKIA:assoc. prof. Ing. Dana Stančeková, PhD.dana.stancekova@fstroj.uniza.sk |
 |
POLAND:prof. dr hab. inż. Anna Rudawska,a.rudawska@pollub.pl |
Projekt systemu współfinansowany ze środków Unii Europejskiej w ramach Europejskiego Funduszu Społecznego, Program Operacyjny Wiedza Edukacja Rozwój 2014-2020 "PL2022 - Zintegrowany Program Rozwoju Politechniki Lubelskiej" POWR.03.05.00-00-Z036/17
