| Anna Rudawska,
Izabela Miturska, Dana Stančeková, Jacek Mucha | The strength of traditional and
self-pierced riveted joints |
| Petr Hrabě, Viktor Kolář, Abraham
Kabutey, Aleš Sedláček | Welding materials used to increase service life of agricultural machinery
processing soil |
| Vasile Ceclan, Sorin Grozav | Determination of the force required for the hydroforming of al 99,5 |
| Robert Karpinski, Jakub Szabelski, Jacek
Maksymiuk | Analysis of the properties of bone cement with respect to its
manufacturing and typical service lifetime conditions |
| Milan Vaško, Marián Handrik, Peter Kopas,
Bohuš Leitner | Optimization and design of the vulcanization press sandwich pressure
plate parameters |
| Vladimíra Schindlerová, Ivana Šajdlerová | The importance of proper evidence and identification of metallurgical
materials for effective management of the company |
| Augustín Görög, Ingrid Görögová , Dana
Stančeková, Miroslav Janota | Influence of roller – burnishing
on surface roughness parameters and roundness |
| Jiří Hajnyš , Marek Pagáč, Tomáš Zlámal,
Jana Petrů , Lukáš Kousal | Stiffness of 316L stainless steel support structures proposed for the SLM
process |
| Peter Kopas, Milan Sága, Michal Jambor,
František Nový, Libor Trško, Lenka Jakubovičová | Comparison of the mechanical properties and microstructural evolution in
the HAZ of HSLA DOMEX 700MC welded by gas metal arc welding and electron beam
welding |
| Vladimíra Schindlerová, Ivana Šajdlerová,
Dominika Lehocká | Dynamic Simulation for Optimisation Solution of Manufacturing Processes |
| Lenka Jakubovičová, Alžbeta Sapietová,
Jan Moravec | Static analysis of transmission tower beam structure |
| Sylvia Kuśmierczak, Martin Makovský | Problems of blackening of steel parts in technical practice |
| Jaromir Moravec, Iva Novakova, Tomasz Kik | Possibilities of using interlayers during diffusion welding of Ti Gr2 and
AISI 316L |
| Alžbeta Sapietová, Filip Chovanculiak,
Vladimír Dekyš, Lukáš Gajdoš | The contribution to the modal analysis of the control system |
| Ivan Kuric, Vladimír Tlach, Zuzana
Ságová, Miroslav Císar Igor Gritsuk | Measurement of Industrial Robot Pose Repeatability |
| Marián Handrik, Jana Handriková, Milan
Vaško, Filip Dorčiak | Comparation of nonuniform and uniform Monte – Carlo Searching |
| Jaromir Moravec, Iva Novakova, Jiri
Sobotka, Tomasz Kik | Application possibilities of the low-temperature repairs on
creep-resistance turbine components from material GX23CrMoV12-1 |
| Jan Novotný, Irena Lysoňková, Milan
Sapieta | Nanocomposite coatings in polymeric matrices and their effect on friction
coefficient |
| Jakub Szabelski | Effect of Incorrect Mix Ratio on Mechanical Properties of Two Component
Adhesive Materials |
| Matej Kandera, Miroslav Císar, Ivan
Zajačko | Capabilities of processing and visualization of production facilities
diagnostic data |
| Tetiana Vitenko, Paweł Droździel, Nazar
Horodyskyi | Hydrodynamics features in cavition devices under tangent medium input |
| Tomáš Zlámal, Jana Petrů, Šárka Malotová,
Zbigniew Brytan, Václav Musil | The Evaluation of the Surface Quality after Laser Cutting |
| František Bárnik, Milan Sága, Ondrej
Štalmach | Innovation of hardness tester mechanism and its functionality test |
| Peter Šulka, Milan Sapieta | Static structural analysis of rolling ball bearing |
| Mário Drbúl, Pavol Martikáň, Jozef
Bronček, Ivan Litvaj, Jaroslava Slobodová | Analysis of roughness profile on curved surfaces |
| Vladimír Bulej , Nadežda Čuboňová,
Manfred Eberth, and Karol Vasilko | The mould for production of plastic spout cap with internal thread by
injection moulding |
| Ondrej Stalmach, Vladimir Dekys,
Frantisek Barnik, Jan Simon | The contribution to the determination of the thermal emissivity of the
composite material using the long-wave infrared camera |
| Ivan Zajačko, Tomáš Gál, Zuzana Ságová,
Vasyl Mateichyk Dariusz Wiecek | Artificial Intelligence methods in technical diagnostics |
| Maciej Kowalski, Magdalena Wiśniewska,
Paweł Karolczak, Jozef Holubjak | Possibilities of applying motif group parameters for description
roughness of turned surfaces |
| Miroslav Müller, Petr Valášek, Miloslav
Linda, Viktor Kolář | Research on water jet cutting of composites based on epoxy /
microparticles from coconut shell |
| Mária Čilliková, Miroslav Neslušan , Anna
Mičietová, Juraj Uríček | Non homogeneity of surface integrity after hard milling of high tempered
bearing steel |
| Nataša Náprstková, Pavel Kraus, Jan
Sviantek, Tuong Nguyen Van | Influence of Ca, Sb and Heat Treatment on AlSi9CuMnNi Alloy in Frame of
their properties from View of Machining |
| Tomáš Dodok, Nadežda Čuboňová, Dorota
Wiecek | Optimization of machining processes preparation with usage of Strategy
Manager |
| Jiří Kratochvíl , Marek Sadílek , Jozef
Mrazik | The effect of chip former on power loading of recessing tool |
| Anna Rudawska, Izabela Miturska | Impact Study of Single Stage and Multi Stage Abrasive Machining on Static
Strength of Lap Adhesive Joints of Mild Steel |
| Libor Sitek, Petr Hlaváček, Lenka
Bodnárová | Use of high-speed water flows for accelerated mechanical modelling of
erosive wear of concrete surfaces |
| Karel Šramhauser, Nataša Náprstková,
Pavel Kraus, Martin Marek | Tool life rating of the cutting insert |
| Tomáš Zlámal, Jana Petrů, Šárka Malotová,
Zbigniew Brytan, Václav Musil | The Evaluation of the Surface Quality after Laser Cutting |
| Adam Patalas, Michał Regus, Katarzyna
Peta | Studies of thin-walled parts deformation by gripping force during turning
process on an example of bearing ring |
| Donatas Kriaučiūnas, Saugirdas Pukalskas,
Alfredas Rimkus | Simuliation of spark ignition engine performance working on biogas
hydrogen mixture |
| Iwona Rybicka, Ondrej Stopka, Vladimír
Ľupták, Mária Chovancová, Paweł Droździel | Application of the methodology related to the emission standard to
specific railway line in comparison with parallel road transport: a case
study |
| Ivan Kuric, Vasyl Mateichyk, Miroslaw
Smieszek, Mykola Tsiuman, Nataliia Goridko, Igor Gritsuk | The peculiarities of monitoring road vehicle performance and
environmental impact |
| Pavol Kukuča, Dalibor Barta, Robert
Labuda, Tsvetomir Gechev | Engine with unconventional crank mechanism FIK |
| Jacek Caban, Jan Vrabel, Branislav
Šarkan, Janusz Zarajczyk, Andrzej Marczuk | Analysis of the market of electric tractors in agricultural production |
| Pavol Kukuča, Dalibor Barta, Ján Dižo,
Jacek Caban | Piston kinematics of a combustion engine with unconventional crank
mechanism |
| Katarzyna Peta, Jan Żurek, Adam Patalas | Non-destructive testing of automotive heat exchangers |
